NEXCOM NViS 6220 User Manual

Page 61

NViS 6210 / 6220 User Manual

Chapter 3: System Setup

Default Configuration

Most of the configuration settings are either predefined according to
the Load Optimal Defaults settings which are stored in the BIOS or are
automatically detected and configured without requiring any actions.
There are a few settings that you may need to change depending on your
system configuration.

Entering Setup

When the system is powered on, the BIOS will enter the Power-On Self
Test (POST) routines. These routines perform various diagnostic checks; if
an error is encountered, the error will be reported in one of two different
ways:

• If the error occurs before the display device is initialized, a series of

beeps will be transmitted.

• If the error occurs after the display device is initialized, the screen will

display the error message.

Powering on the computer and immediately pressing allows you to
enter Setup. Another way to enter Setup is to power on the computer and
wait for the following message during the POST:

TO ENTER SETUP BEFORE BOOT PRESS
Press the ~~key to enter Setup:~~

Legends

Key

Function

Right and Left arrows

Moves the highlight left or right to

select a menu.

Up and Down arrows

Moves the highlight up or down

between sub menus or fields.

Exits the BIOS Setup Utility.

+ (plus key)

Scrolls forward through the values

or options of the highlighted field.

- (minus key)

Scrolls backward through

the values or options of the

highlighted field.

Tab

Selects a field.

Displays General Help.

Load previous values

Load optimized default values.

Saves and exits the Setup

program.

Press to enter the

highlighted sub menu

Scroll Bar

When a scroll bar appears to the right of the setup screen, it indicates that
there are more available fields not shown on the screen. Use the up and
down arrow keys to scroll through all the available fields.