NEXCOM IPPC 1560T - Manual (Page 19)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 2
Chapter 1: Product Introduction
IPPC 1560T/1960T/2160P Series User Manual
Specifications
System
▪ CPU: Support 2nd/3rd gen. Intel ® Core™ processor family, rPGA 988
– Intel ® Core™ i7-3520ME (2 x 2.9GHz, 4M cache, Max. TDP 35W)
– Intel ® Core™ i5-3610ME (2 x 2.7GHz, 3M cache, Max. TDP 35W)
(Default)
– Intel ® Core™ i3-3120ME (2 x 2.4GHz, 3M cache, Max. TDP 35W)
– Intel ® Celeron ® B810 (2 x 1.6GHz, 2M cache, Max. TDP 35W)
– Intel ® Pentium ® B950 (2 x 2.1GHz, 2M cache, Max. TDP 35W)
▪ BIOS: AMI BIOS
▪ System chipset: Intel ® HM76 Express chipset
▪ System memory: 1x 204-pin DDR3 SO-DIMM socket, 4G DDR3 (default),
support up to 8GB DDR3-1066/1333, non-ECC and un-buffered
▪ Storage Device:
– 1x external locked CFast socket
– 2x hard drive bay: optional 2x 2.5” SATA HDD
▪ Watchdog timer: Watchdog timeout can be programmed by software
from 1 second to 255 seconds and from 1 minute to 255 minutes
(Tolerance 15% under room temperature 25
°C)
▪ H/W status monitor: Monitoring system temperature, and voltage
▪ Expansion:
– 2x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
– 2x expansion slots for add-on PCI or/and PCIe cards
– 1x PCI and 1x PCIe x4 slots (default)
– 2x PCIe x4 slots
– 2x PCI slots
▪ Panel backlight control button: increase brightness/decrease brightness/
backlight on/off (for IPPC 1560TP2E-AC only)
Rear I/O
For All
▪ 2x PS2 keyboard/mouse
▪ 2nd display VGA port: 1x DB15
▪ Ethernet: 2x RJ45
For IPPC 1560TP2E-DC only
▪ USB: 5x USB2.0 (1 in front)
▪ Audio port: 1x Line-out; 1x Line-in; 1x MIC-in
▪ COM #1: RS232/422/485 w/ RI or 5V or 12V selection
▪ COM #2: RS232/422/485 w/ RI or 5V or 12V selection
▪ COM #3: RS232 w/ RI or 5V or 12V selection
▪ ATX power switch
▪ Reset button
For IPPC 1560TP2E-AC only
▪ USB: 5x USB2.0 (1 in front)
▪ Audio port: 1x Line-out; 1x Line-in; 1x MIC-in
▪ COM #1: RS232/422/485 w/ 2.5kv isolated protection
▪ COM #2: RS232/422/485 w/ 2.5kv isolated protection
▪ COM #3: RS232 w/ RI or 5V or 12V selection
▪ COM #4: RS232 w/ RI or 5V or 12V selection
▪ COM #5: RS232
▪ COM #6: RS232
▪ DIO w/ 2.5kv isolated protection:
– 4x Digital Input (source type)
– 4x Digital Output (sink type)
▪ GPIO: 4x digital in/4x digital out
▪ LPT: Parallel port
▪ AC Power switch
▪ Reset button