NEXCOM IPPC 1560T - Manual (Page 129)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 112 IPPC 1560T/1960T/2160P Series User Manual
Chapter 4: BIOS Setup
LCD Control
Chipset
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary boot
display selection will appear
based on your selection.
VGA modes will be supported
only on primary display
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
Active LFP
[CRT]
[LVDS]
[Int-LVDS]
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
Secondary IGFX Boot Display
Select the secondary display device.
Active LFP
Select the Active LFP configuration.
No LVDS VBIOS does not enable LVDS.
Int-LVDS VBIOS enables LVDS driver by Integrated encoder.
PEG0 - Gen X
Configure PEG0 B0:D1:F0 Gen1-Gen3.
PEG1 - Gen X
Configure PEG1 B0:D1:F1 Gen1-Gen3.
Enable PEG
Enables or disables the PEG slot.
Chipset
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Configure PEG0 B0:D1:F0
Gen1-Gen3 NB PCIe Configuration
PEG0
PEG0 - Gen X
PEG1
PEG1 - Gen X
Enable PEG
Not Present
[Auto]
x1 Gen1
[Auto]
[Enabled]
NB PCIe Configuration
This section is used to configure Northbridge PCI Express settings.