NEXCOM IPPC 1560T - Manual (Page 117)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 100 IPPC 1560T/1960T/2160P Series User Manual
Chapter 4: BIOS Setup
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for
Hyper-Threading Technology)
and Disabled for other OS (OS
not optimized for
Hyper-Threading Technology).
When Disabled only one thread
per enabled core is enabled.
CPU Configuration
Intel(R) Core(TM) CPU i5-3610ME CPU @ 2.70GHz
CPU Signature
Microcode Patch
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
Hyper-threading
Intel Virtualization Technology
306a9
12
2700 MHz
2
Supported
Supported
Supported
Supported
[Enabled]
[Disabled]
Hyper Threading
Enables or disables hyper-threading technology.
Intel ® Virtualization Technology
Enables or disables Intel ® Virtualization technology.
SATA Configuration
This section is used to configure the SATA drives.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable SATA Device. SATA Controller(s)
SATA Mode Selection
Serial ATA Port 0
Software Preserve
Serial ATA Port 1
Software Preserve
Serial ATA Port 2
Software Preserve
Serial ATA Port 3
Software Preserve
[Enabled]
[IDE]
Empty
Unknown
Empty
Unknown
8GB SATA Flash (8.0GB
SUPPORTED
Empty
Unknown
SATA Controller(s)
Enables or disables SATA device.
Serial ATA Port 0 to Serial ATA Port 3
Displays information on the SATA devices detected.