NEXCOM IPPC 1560T - Manual (Page 123)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 106 IPPC 1560T/1960T/2160P Series User Manual
Chapter 4: BIOS Setup
Serial Port 5 Configuration
This section is used to configure serial port 5.
Parallel Port Configuration
This section is used to configure the parallel port.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the serial port.
Parallel Port
Enables or disables the parallel port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the parallel port.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 5 Configuration
Serial Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=2E0h; IRQ=10;
[Auto]
[Disable IR1 function]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Parallel Port
(LPT/LPTE) Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h; IRQ=5;
[Auto]
[STD Printer Mode]