Installing antennas – NEXCOM NISE 3640E User Manual
Page 68
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
54
NISE 3640E Series User Manual
Chapter 3: System Setup
Installing Antennas
1. Remove the antenna hole covers located in the front panel.
Antenna hole covers
Antenna hole covers
3. Insert the 2 rings (ring 1 and ring2) onto the antenna jack.
Antenna jack
2. Insert the antenna jack through the antenna hole.
4. Attach one end of the RF cable onto the module.
RF Cable
This manual is related to the following products: