Installing a wireless lan module (half-size) – NEXCOM NISE 3640E User Manual
Page 64
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
50
NISE 3640E Series User Manual
Chapter 3: System Setup
Installing a Wireless LAN Module
(half-size)
1. Locate the Mini PCI Express slot on the board.
Mini PCI Express Slot
Screw
2. Fasten the Wireless LAN module with the mini PCI express bracket.
3. Insert the wireless LAN module into the Mini PCI Express slot at a 45
degree angle until the gold-plated connector on the edge of the module
completely disappears inside the slot.
4. Push the module down and then secure it with mounting screws.
Screw
This manual is related to the following products: