Removing the chassis bottom cover – NEXCOM NISE 3640E User Manual

Page 54

Text mode
Original mode

NISE 3640E Series User Manual

Chapter 3: System Setup

Removing the Chassis Bottom Cover

Note: Installation for SATA Hard Drive and SATA DOM only

Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.

CAUTION!

1. With the bottom side of the chassis facing up, remove the mounting

screw of the bottom cover and then put them in a safe place for later use.

2. Lift up the cover and remove it from the chassis.

This manual is related to the following products:

NISE 3640E2 NISE 3640P2 NISE 3640P2E