Exit, Compatibility support module (csm) configuration – NEXCOM NEX 617 User Manual

Page 53

NEX 617 User Manual

Chapter 3: BIOS Setup

CSM

Enables or disables CSM. Enabled to launch the Compatibility Support

Module. If Windows 8 64-bit UEFI is used and all the devices support UEFI,

CSM may be disabled for faster boot speed.

Compatibility Support Module (CSM) Configuration

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Enable to launch the
Compatibility Support Module.
If you are using Windows 8
64-bit UEFI and all of your

devices support UEFI, you may
also disable CSM for faster

boot speed.

CSM

[Disabled]

Boot

Save Changes and Exit

To save the changes and exit, select this field then press . A dialog

box will appear. Confirm by selecting Yes.
Discard Changes and Exit

To exit the Setup utility without saving the changes, select this field then

press . You may be prompted to confirm again before exiting.
Discard Changes

To discard all the changes, select this field then press . A dialog box

will appear. Confirm by selecting Yes.
Load UEFI Defaults

To restore the BIOS to default settings, select this field then press . A

dialog box will appear. Confirm by selecting Yes.

Exit

Advanced

H/W Monitor Security

Boot

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Exit system setup after saving
the changes.

F10 key can be used for this
operation.

Save Changes and Exit

Discard Changes and Exit

Discard Changes

Load UEFI Defaults

Launch EFI Shell from filesystem device

Exit