NEXCOM NEX 617 - Manual (Page 44)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 30 NEX 617 User Manual
Chapter 3: BIOS Setup
No-Execute Memory Protection
Enables or disables No-Execute Memory Protection, enabling it will prevent
data pages from being used by malicious software.
Hardware Prefetcher
Turns on or off the MLC streamer prefetcher.
Adjacent Cache Line Prefetch
Enables or disables the adjacent cache line prefetch.
Intel ® Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Intel SpeedStep technology
allows processors to switch
between multiple frequencies and
voltage points for better power
saving and heat dissipation.
Intel(R) Celeron(R) CPU N2920 @ 1.86GHz
Max CPU Speed
Min CPU Speed
Processor Cores
Intel VT-x Technology
64-bit
Intel SpeedStep Technology
CPU C States Support
Enhanced Halt State(C1E)
No-Execute Memory Protection
Hardware Prefetcher
Adjacent Cache Line Prefetch
Intel Virtualization Technology
1866 MHz
533 MHz
4
Not Supported
Supported
[Enabled]
[C7]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Intel ® SpeedStep Technology
Enables or disables Intel ® SpeedStep.
CPU C States Support
Enable CPU C States Support for power saving. It is recommended to keep
C3, C6 and C7 all enabled for better power saving.
Enhanced Halt State (C1E)
Enable Enhanced Halt State (C1E) for lower power consumption.