NEXCOM NEX 617 User Manual

Page 45

NEX 617 User Manual

Chapter 3: BIOS Setup

Primary Graphics Adapter
Selects which primary graphics adapter to boot the system.

Share Memory
Configures the amount of memory shared to the onboard graphics.

Active LVDS
Enables or disables LVDS.

Panel Type Selection
Selects the panel type used by the onboard graphics by selecting the
appropriate setup item.

Onboard HD Audio
Enables or disables the onboard HD audio, setting auto will automatically
disable the onboard HD audio when an external sound card is installed.

Front Panel
Enables or disables the onboard HD audio front panel.

Onboard HDMI HD Audio
Enables or disables the onboard HDMI HD audio.

Onboard LAN1 to LAN2
Enables or disables onboard LAN1 and LAN2.

PCIE1 Link Speed
Configures the link speed of PCIE1.

Deep S5
Enables or disables deep sleep (S4/S5). Deep sleep for mobile platforms is
supported in DC only, and supported in AC only for desktop platforms.

Restore on AC/Power Loss
Power Off

When power returns after an AC power failure, the

system’s power is off. You must press the Power button

to power-on the system.

Power On

When power returns after an AC power failure, the

system will automatically power-on.

Chipset Configuration

This section is used to configure the chipset features.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Select a primary VGA.

Primary Graphics Adapter

Share Memory

Active LVDS

Panel Type Selection

Onboard HD Audio

Front Panel

Onboard HDMI HD Audio

Onboard LAN1

Onboard LAN2

PCIE1 Link Speed

Deep S5

Restore on AC/Power Loss

[PCI Express]

[Auto]

[Enabled]

[1440x900/24-bit/2-ch/LED]

[Enabled]

[Auto]

[Enabled]

[Auto]

[Disabled]

[Power Off]