NEXCOM NEX 617 User Manual
Page 46
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
32
NEX 617 User Manual
Chapter 3: BIOS Setup
SATA Controller(s)
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA as IDE, AHCI or RAID mode.
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
SATA Aggressive Link Power Management
Enables or disables the SATA aggressive link power management.
Hard Disk S.M.A.R.T
Enables or disables hard disk S.M.A.R.T feature.
Storage Configuration
This section is used to configure the storage features.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Enable/disable the SATA
controllers.
SATA Controller(s)
SATA Mode Selection
SATA Aggressive Link Power Mgmt
Hard Disk S.M.A.R.T
SATA2_1 : Not Detected
SATA2_2/mini-SATA: Not Detected
[Enabled]
[AHCI Mode]
[Disabled]
[Disabled]