Boot – NEXCOM NEX 617 User Manual

Page 52

NEX 617 User Manual

Chapter 3: BIOS Setup

Exit

Advanced

H/W Monitor Security

Boot

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Sets the system boot order

Boot Option Priorities

Boot Option #1

Fast Boot

Boot From Onboard LAN

Setup Prompt Timeout

Bootup Num-Lock

Boot Beep

Full Screen Logo

CSM(Compatibility Support Module)

[UEFI: KingstonDT 101 G2 1.00]

[Disabled]

[On]

[Disabled]

[Enabled]

Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.

Fast Boot
Fast boot minimizes your computer’s boot time. The options are Disabled,
Fast and Ultra Fast. In fast mode you may not boot from an USB storage
device. Ultra Fast mode is only supported by Windows 8 and the VBIOS
must support UEFI GOP if you are using an external graphics card.

Boot From Onboard LAN
Enables or disables Boot From Onboard LAN.

Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0XFFFF) means
indefinite waiting.

Bootup Num-Lock
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of
the numeric keypad is the number keys. When set to Off, the function of
the numeric keypad is the arrow keys.

Boot Beep
Enables or disables beep sound during system boot, a buzzer is needed.

Full Screen Logo
Enables or disables the display of OEM logo.

CSM (Compatibility Support Module)
Configuration for CSM, please disable CSM when Fast Boot is enabled.

Boot

This section is used to configure the boot features.

