Acpi settings – NEXCOM NEX 617 User Manual
Page 48
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
34
NEX 617 User Manual
Chapter 3: BIOS Setup
ACPI Settings
This section is used to configure ACPI settings.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Select disable for ACPI
suspend type S1. It is
recommended to select auto for
ACPI S3 power saving.
Suspend to RAM
ACPI HPET Table
PS/2 Keyboard Power On
PCI Devices Power On
RTC Alarm Power On
USB Keyboard/Remote Power On
USB Mouse Power On
[Auto]
[Enabled]
[Disabled]
[Disabled]
[By OS]
[Disabled]
[Disabled]
Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto
for ACPI S3 power saving.
ACPI HPET Table
Enables or disables ACPI HPET Table.
PS/2 Keyboard Power On
Enables or disables PS/2 keyboard to turn on the system from the power-
soft-off mode.
PCI Devices Power On
Enables or disables PCI devices to turn on the system from the power-soft-
off mode.
RTC Alarm Power On
Enables or disables real time clock (RTC) to power on the system.
USB Keyboard/Remote Power On
Enables or disables USB Keyboard/Remote to power on the system.
USB Mouse Power On
Enables or disables USB mouse to power on the system.