Hgmc-11s – Neotech Communications HGMC-11S User Manual

Page 4

HGMC-11S

Hardened 1-port 1000Base-TX to 1000Base-FX SFP Media Converter

V1.0

Assembly, Startup, and Dismantling

Installation

 Installation: Mount the Micro type unit onto a fixture, or camera housings, e.g. a plank, (either on the wall or on

a flat surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in position.

 Startup: Connect the supply voltage to start up the Media Converter via the terminal block.

 Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.

Manual Earth Green manual is available on our website.