Neotech Communications FEC-11CP - Manual

FEC-11CP Series
Industrial 10/100Base-TX Ethernet over Coaxial Converter with PoE & PoC
1 V1.3
This quick start guide describes how to install and use the FEC-11CP Series Ethernet-over-coax (EoC) converter
with Power over Coax (PoC) and Power over Ethernet (PoE). The EoC converter introduced here consists of a
transmitter (TX) and receiver (RX) and provides one channel for Ethernet over a coaxial cable with PoC/PoE.
Product Overview
Transmitter
Receiver
Product Features
 Complies with EN55022 Class A EMC Generic standard immunity.
 Operates transparent to higher layer protocols.
 One Ethernet port (RJ-45 connector): 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto-MDI/MDIX.
 Complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX standards.
 Supports IEEE 8023af Power over Ethernet (PoE) Power Sourcing Equipment (PSE)
 One Ethernet Extender port (BNC connector): Downlink: 36Mbps (max.); Uplink: 11Mbps (max.).
 Maximum distance: 500m over Coax.
 Provides BNC connector (female).
 External AC to DC power adapter.
 Operating voltage and max. current consumption: 0.8A @ 48VDC. Power consumption: 38.4W Max.
 -10°C to 60°C (14°F to 140°F) operating temperature range.
 Supports Wall Mounting installation.
 Used as a stand-alone device.