Neotech Communications FEC-11C User Manual
Neotech Communications Hardware

FEC-11C Series
10/100Base-TX Ethernet Over Co-axial Cable
1 V1.0
This quick start guide describes how to install and use the Ethernet-over-coax (EoC) converter. The EoC converter
introduced here consists of a transmitter and receiver and provides one channel for Ethernet over a coaxial cable.
Product Overview
Product Features
Complies with EN61000-6-2 EMC Generic standard immunity.
Operates transparent to higher layer protocols.
One Ethernet port (RJ-45 connector): 10/100Mbps-Full/Half-duplex, Auto-negotiation, Auto-MDI/MDIX.
Complies with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX standards.
One Ethernet Extender port (BNC connector): Downlink: 20Mbps; Uplink: 3Mbps.
Maximum distance: 300m over Coax.
Provides BNC connector (female).
External AC to DC power adapter.
Operating voltage and Max. current consumption: 0.2A @ 12VDC. Power consumption: 2.4W Max.
-10°C to 60°C (14°F to 140°F) operating temperature range.
Supports Wall Mounting installation.
Used as a stand-alone device.