Neotech Communications HGSW-42SHP - Manual

HGSW-42SHP
Self-Configured Hardened 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch with PoE+/PSE
1 V1.0
This quick start guide describes how to install and use the Self-Configured Hardened Ethernet Switch with PoE+.
This is the Switch of choice for harsh environments.
Overview
The HGSW-42SHP product is a Self-Configured Hardened Ethernet switch which provides 4 port
10/100/1000Base-TX + 2x1000Base-FX SFP port. The 10/100/1000Base-TX ports supports PoE+
(Power Sourcing Equipment) and compliant with IEEE 802.3at.
Comply with IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE 802.3x, and IEEE802.3at. The
product will provide PoE power to any IEEE802.3at/af compliant network device. It supports IGMP
snooping which significantly saves the network bandwidth and reduces network load. With its reliable
design and ease of use, the product is a great choice for integrating networks consisting of network
devices such as IP cameras and wireless access points between remote locations.
General
To ensure trouble free transportation and storage, all Neotech products must be thoroughly inspected,
tested and well packed before delivery. Check the product upon receipt for any visible damage which may
have been caused during shipping.
Package Content
 Self-Configured Hardened 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch
with PoE+/PSE x 1
 Quick Start Guide x 1
Physical Description
Front Panel
Rear Panel (Din-Rail)
Rear Panel (Wall mount)
Mounting holes