Neotech Communications GFSW-216SF - Manual (Page 4)

GFSW-216SF
Unmanaged Rack Mount 16-port 100Base-FX SFP + 2-port 10/100/1000Base-TX Optical Ethernet Switch
V1.0 4
Cable Connection
Interface Type Support Description Cable Type
RJ-45
10Base-TX
100Base-TX
1000Base-TX
Category 3 or above cable
Category 5 or above cable
Category 5e or above cable
SFP
1/2 core SM/MM Optical fiber interface (depends
on the SFP)
LC
Power AC power interface with 100~240 V AC input AC Power Socket
The Port Status LEDs and dimension drawing of the unit
LED State Indication
PWR Green Power on.
Off Power off.
FX
LINK/ACT
Green The Fiber is linked
Flashing Transmitting or receiving data.
RJ45
SPD
Yellow 1000Base-TX
Off 10/100Base-TX
RJ45
LINK/ACT
Steady A valid network connection established
Flashing Transmitting or receiving data.
ACT Stands for Activity.
Functional Description
 19” 1U Rack-mount cabinet
 RJ45 10/100/1000-Full/half-duplex, Auto-negotiation, Auto MDI/MDIX
 Supports external SFP
 Supports 802.3x Flow Control
 Support 8K MAC address
 1M bit frame buffer memory
 AC Power input (100VAC~240VAC, 50/60HZ).
 0℃ to 50℃ ( 32℉ to 122℉) operating temperature range.
 Complies with EN55022 class A standard.
 Extensive LED indicators for network diagnostics.
Assembly, Startup, and Dismantling
Installation
 Assembly: The product can either be directly installed in a 19” cabinet rack.
 Startup: Connect the supply voltage to start up the Optical Ethernet Switch via the AC jack.
 Dismantling: Locate and remove the 4 rack mounting screw. screws. Usually, but not limited to, at
least 2 screws.
Manual Earth Green manual is available in our website. www.neotechcomm.com.tw
Top View
Side View