Neotech Communications GFSW-216SF - Manual (Page 3)

GFSW-216SF
Unmanaged Rack Mount 16-port 100Base-FX SFP + 2-port 10/100/1000Base-TX Optical Ethernet Switch
V1.0 3
Setup
a) Connect the Ethernet port of the optical Ethernet switch to be used to a PC or network device with a
network cable.
b) Insert the appropriate SFP into the corresponding SFP port. Connect the fiber cable from the remote
device (media converter or switch) to the LC connector of the SFP.
c) After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the
power supply connection.
d) After all cables are correctly connected, the indicators will be lit as per port status LEDs (page 4).
Interface
Ethernet Port
RJ-45 Pin Assignment
Pin MDI MDIX
1 TP0+ TP1+
2 TP0- TP1-
3 TP1+ TP0+
4 TP2+ TP3+
5 TP2- TP3-
6 TP1- TP0-
7 TP3+ TP2+
8 TP3- TP2-
Power Connection
The power interface of GFSW-216SF complies with the IEC60320-C14 standard and the AC power
socket complies with the IEC60320-C13 standard
IEC60320-C14 AC Power Socket
Mounting
Holes