Neotech Communications GFSW-216SF - Manual (Page 2)

GFSW-216SF
Unmanaged Rack Mount 16-port 100Base-FX SFP + 2-port 10/100/1000Base-TX Optical Ethernet Switch
V1.0 2
Installation
SFP Transceiver Module
You can select different SFP modules as required (Please refer to our SFP selection list for the
appropriate module).
To insert/remove the SFP, the procedures are as follows :
1. On the front panel, insert the SFP module into
the SFP port until it is securely locked.
2. Connect the optical fiber (1/2 core) to the LC connector(s) of the SFP.
3. To remove the SFP module, press down the lock of the LC connector of the
optical fiber to pull out the fiber cable.
4. Pull down the SFP lever and hold its position. Pull out the SFP module
from the SFP port.
Rack Installation
GFSW-216SF can be installed on a rack. The product has 4 mounting holes. Use 4 rack mount screws to
securely install the product in a 19” rack cabinet.