KBC Networks Compact Transceiver User Manual
Page 22
Compact Transceiver User Manual
Manual-Fx＿MSeries-Rev1008.pdf Page 18 of 30
Copyright © KBC Networks Ltd.
Receiver Right View
Connectors:
VIDEO : Video output, BNC.
DATA: RS232/RS422/2 wires RS485/4 wires RS485 compatible. Terminal pins
assignment and DIP Switch setting refer to Table 1 and Table2 in section 6.
Data Block Connections and DIP Switch Setting.
C1: Contact Closure input
C2: Contact Closure output.
The Contact Closure state, Open or Close, of the contact closure on the
receiver end follows the state of the contact closure on the transmitter end. I.e.
if the contact on the transmitter end is Close, the contact on the receiver end
is made to be Close. If the contact on the transmitter end is Open, the contact
on the receiver end is made to be Open.
Terminal pins assignment as below:
Contact Closure input
“A”
Contact Closure input
“B”
Contact Closure output
“A”
Contact Closure output
“B”
12~24V: Power Supply refers to section 5. Power Input Specifications.
Receiver Left View
Connectors:
FIB:
Fiber Optic.
: Ground Pin.
LEDs Definition:
FIB: Fiber Link. Off if link continuity is good.
On if no link continuity.
VIDEO: Video. On if video output is OK.
Off if no video present.
DATA1: RS232/RS422/ 4 wires RS485 Transmit Data.
:
Flash if data being transmitted.
1
2
3
4
VIDEO
DATA DIP
1 2 3 4
1 2 3 4
C1 C2
FIB
F
IB
V
ID
E
O
D
A
T
A
1
D
A
T
A
2
12~24V
+
-