KBC Networks Compact Transceiver User Manual
Page 12
Compact Transceiver User Manual
Manual-Fx＿MSeries-Rev1008.pdf Page 8 of 30
Copyright © KBC Networks Ltd.
Transmitter Right View
Connectors:
VIDEO : Video input, BNC.
DATA: RS232/RS422/2 wires RS485/4 wires RS485 compatible. Terminal pins
assignment and DIP Switch setting refer to Table 1 and Table2 in section 6.
Data Block Connections and DIP Switch Setting.
C1: Contact Closure input.
C2: Contact Closure output.
The Contact Closure state, Open or Close, of the contact closure on the
transmitter end follows the state of the contact closure on the receiver end. I.e.
if the contact on the receiver end is Close, the contact on the transmitter end is
made to be Close. If the contact on the receiver end is Open, the contacts on
the transmitter end is made to be Open.
Terminal pins assignment as below:
Contact closure input
“A”
Contact closure input
“B”
Contact closure output
“A”
Contact closure output
“B”
12~24V: Power Supply refers to section 5. Power Input Specifications.
Transmitter Left View
Connectors:
FIB: Fiber Optic.
: Ground Pin.
LEDs Definition:
FIB: Fiber Link. Off if link continuity is good.
On if no link continuity.
VIDEO:
;
Video.
On if video input is OK.
Off if no video present.
DATA1: RS232/RS422/ 4 wires RS485 Transmit Data.
:
Flash if data being transmitted.
Off if no data being transmitted.
1
2
3
4
VIDEO
DATA DIP 12~24V
1 2 3 4
C1 C2
FIB
F
IB
V
ID
E
O
D
A
T
A
1
D
A
T
A
2
+
-