KBC Networks MPEG4 Encoder - Manual (Page 25)

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 25 of 33 www.kbcnetworks.com
WAN/LAN & other IP Settings. Click “Apply” to reset all (or all but WAN and HTTP
Settings if appropriate box is clicked) configurations to factory defaults.
3.3.17.1 Factory Default Configurations
If all settings are returned to default, the new configurations are as follows:
 LAN/WAN IP Address 192.168.0.100
 LAN/WAN Subnet Mask 255.255.255.0
 Gateway IP Address 192.168.0.254
 GUI Access User Account ID admin
 GUI Access Password 123456
 Audio In Disabled
 Data Protocol Selection (Dip Switch) RS-422/485
 Video Compression Type MPEG-4
 Video Streaming Method TCP
 Video Resolution D1, 720 x 480 (NTSC)
 Frame Rate & Mode 30 FPS, Constant
 Video Bit Rate & Mode 1.2 Mbps, Constant
 Serial Port Baud Rate 9600 BPS
 Serial Port Control 8, None, 1
 Video Control Port 6001
 Video Streaming Port 6002
3.3.18 Save Reboot
This link must be clicked after all setting changes have been applied.
3.3.19 Logout
When this link is clicked, the system will log out without a “save/reboot” process and
will return the user to the account and password login prompt.