KBC Networks MPEG4 Encoder - Manual (Page 14)

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 14 of 33 www.kbcnetworks.com
3.1.2 Accessing the GUI via a Web Browser
The computer used to access the encoder GUI must be set to a static IP address on
the same subnet as the encoder. The default configuration is on the 192.168.1.x
subnet (refer to provided documentation for exact IP per unit Serial Number)
therefore the computer must also be set to a 192.168.1.x IP address if the unit is
still on its factory set configurations.
Once the computer’s IP address is confirmed, open a web browser such as MS
Internet Explorer
® . Type in the encoder IP address in the address bar at the top of
the web browser. If the IP is correct and the link activity is established, the browser
will prompt you to enter the user ID and password. The ID and password is
“admin” / “admin” (case sensitive).
3.1.2.1 Language Options
The following Language Options exist for the user interface:
 English (default)
 Traditional Chinese
 Simplified Chinese
 Japanese
 Spanish
 Italian
 German
 Portuguese
 Czech
 French
 Finnish
 Hungarian
 Danish
Note: Pull down menu options on configuration screens remain in English.
Note: The language option chosen from the account ID / password login will remain
admin