KBC Networks MPEG4 Encoder User Manual
Page 19

Encoder User Manual
Manual-MPEG4_ENCA-Rev1206
Copyright © KBC Networks 2011
Page 19 of 33
www.kbcnetworks.com
3.3.5 Video Setting
Camera Name
Enter the particular camera number or a description
such as “North Lot” or “Main Gate”.
Streaming Method Select the desired streaming mode. The options
available are:
- TCP Only
- Multicast Only
- RTP over Multicast
- RTP over UDP & Multicast
Note: video is displayed in the encoder interface in TCP
only. All other streaming methods must be viewed via
the decoder video output.
RTSP Authen
Enable
(appears when RTP
streaming methods
selected)
Check box to enable RTP streaming account/password
authentication
B2 Frame Enable
(appears when RTP
streaming methods
selected)
Check box to enable the B2 frame in RTP streaming
Audio In
Select to enable the audio in, default disabled.
Multicast IP
Select the multicast IP. Default is 228.5.6.1
Multicast TTL
Select the multicast TTL. Default is 255
IGMP
(appears only in
multicast)
Enable to use IGMP membership