Junger Audio b42 - Dynamics Processor - Manual (Page 31)

5. OPERATION
operation manual b42, chapter 5 -Operation- page 5-5
Limiter menu shows limiter settings for selected channel .
Adjustments are made by pushing and turning CONTROL knob
(see 5.1). Return to level display with EXIT.
PR CH >LIM< THRS PRO
01 2 ON -9.0 1
PR:
number of current preset
CH: selected channel (change with SELECT)
LIM: limiter on/off
THRS: limiter threshold level -20 ... 0 dBFS
PRO: selected program-preset for adaptive controlled
algorithms
The selection of the parameter PRO in the limiter edit menu changes the
range of time constant values as follows:
PRO adaptive processing time corresponds to
preset
----------------------------------------------------------------------------------------------
0 2 ms to 0.2 sec
1 5 ms to 0.5 sec LIVE
2 10 ms to 0.8 sec
3 15 ms to 1.2 sec SPEECH
4 30 ms to 2.5 sec POP
5 50 ms to 3.5 sec
6 70 ms to 5.0 sec UNIVERSAL
7 100 ms to 6.0 sec
8 150 ms to 8.0 sec CLASSIC
9 250 ms to 10.0 sec
The basic Multi-Loop principle of Jünger Audio dynamics processors
operates with adaption of dynamic range control parameters to the
incoming audio signal. That means permanently analysis and calculation
of attack times, release times , thresholds and interaction parameters of
several frequency linear control circuits.
(please refer to chapter 2 also)
Changing of PRO defines a limited range of time constant values which is
allowed for the adaptive dynamic range algorithms. Inside this range the
time constants can be varied by the adaptive processing. Setting the range
of time constant values may be sometimes useful, to get the best signal
processing performance regarding specific programme material.
5.7
LIMITER MENU