Junger Audio b42 - Dynamics Processor - Manual (Page 29)

5. OPERATION
operation manual b42, chapter 5 -Operation- page 5-3
1. menu
SYNC< LINK SPLIT
AES 1 + 2 3 + 4 off
SYNC MODE: selection of sync signal input
CH 1/2 - sync on digital input 1/2
EXT - sync on external sync input
VIDEO - sync on video sync input
SDI - sync on SDI input (only if SDI input
or split mode is selected, no sync
LED lits!)
LINK MODE: all channels independent or following link
combinations:
1+2, 3+4, 1+2 & 3+4, 1+2+3+4
SPLIT AES/EBU + SDI input in split mode (see 4.4)
2. menu
IN12< TR12 IN34 TR34
AES off SDI on
INxx:
selection of signal input
AES digital input AES/EBU
SDI SDI input (embedded audio)
TRxx: selection of transparent input
on/off for bit transparent path between
auto input and output (for Dolby E)
If set to AUTO the path is switched to
transparent automatically if the
non-audio flag in the AES/EBU
signal is set.
3. menu (just if SDI interface is present)
SDI GROUPS: > IN< OUT
1 1
IN:
selection of SDI group for deembedding
input signals
1...4
OUT:
selection of SDI group for embedding
output signals
1...4