Junger Audio b42 - Dynamics Processor - Manual (Page 28)

5. OPERATION
page 5-2 operation manual b42, chapter 5 -Operation-
After selection of one of the utility or function menus by pushing
any of the EDIT- buttons or the SELECT button one can adjust
displayed parameters.
CONTROL switches between parameter selection and
parameter adjustment mode, selected
parameter or value is highlighted by arrows
on display
CONTROL change of parameter selection or
adjustment of selected parameter value
(see menu explanation)
Each time SELECT button is pushed it opens next utility menu.
If a function menu is opened (after pushing related EDIT
button) the SELECT button changes the channel selection.
After finishing of settings ESC button switches back to main
level display. All settings are stored as current adjustment
automatically.
Gain display shows gain setting for all channels. You can jump
to the gain menu from any other edit menu by pushing ESC
button.
Adjustments are made by turning&pushing CONTROL knob as
described previously (see 5.1).
GAIN 1: 0.0 3: 0.0
>M:< 2: 0.0 4: 0.0
M:
master control, ganging level settings for all
channels following channel 1
GAIN 1…4: channel independent -15.0 ... +15.0 dB
Mode menu shows sync setting, input and link setting of the
unit. There are two windows available by pushing MODE EDIT
button once or twice.
Adjustments are made by pushing and turning CONTROL knob
(see 5.1). Return to level display with EXIT.
5.1
ADJUSTMENT OF
PARAMETERS
in all menus
5.2
LEVEL DISPLAY
5.3
MODE MENU
turn
push