Junger Audio C8702 Controller C8000 - Manual (Page 11)

C8000
Frame Controller
C8702
digital audio
modular
processing system
11/22
selecting SERVICES
For special applications you may activate the following services:
Maintenance Interface via RCP for internal use only.
Telnet Server for remote access to the console interface via TCP/IP you must
enable the Telnet Server (TCP port 22).
BRC Proxy If a brc 8x is connected via the CAN bus one must activate this
option. Compared to previous implementation the brc remote panel
does no longer talk to the modules directly. A proxy instance is
used as the man in the middle.
enable EmBER protocol support
VSM Support / Ember enabled
you may directly connect with a VSM applications or use the
Ember or Ember+ protocol to remote control the c8k frame.
For details of the VSM system see http://www.l-s-b.de/uk
and for Ember code depository go to :
http://code.google.com/p/ember-plus/
Important Note! Right now we support both, the old Ember and the Ember+ protocol. It is our intention to
remove the old Ember server as soon as VSM fully supports Ember+.
We highly recommend to base your implementation on Ember+.