Junger Audio C8086+ - Level Magic II ™ processor - Manual (Page 5)

Rev. 140416
digital audio
modular
processing system
C8000
Enhanced 8 channel Level MagicII™ processor
C8086+
5/16
PRESETS (Example for activated Dolby metadata option)
The C8086+ offers 16 DSP (audio) presets and 8 Setup/Bus Routing presets. Additionally the
C8086+M (metadata option) has another 16 Dolby metadata presets. The status window at the left
hand side shows the names of the active preset. The word “modified” will appear in line with the
preset name, if parameters from the loaded preset were changed.
DSP
bank of 16 presets to recall DSP (audio) parameters.
Load select a preset by name and press .
The loaded preset number and name will automatically appear in
the below Save as # and Name field.
Programs loaded shows the program number that is affected by the actually
from preset loaded preset.
Important Note! The audio structure of the C8086+ is program oriented and allows processing of
two
(5.1 + 2) or four programs (4 x 2). I.e. you can not mask independent channels but programs.
Save as # select a preset memory number where you would like to save the
actual audio program parameters to.
Name assign the preset you are about to save a name (up to 16 digits).
Programs to include tick the check box(es) for which program the preset shall be
in preset saved and press .
The number and the name appears automatically in the load
fields as well because they are active now.