Junger Audio C8000 System - Manual (Page 13)

digital audio
modular
processing system
C8000
system configuration
7/7
Remote Control of the frame:
Each frame must have a Frame Controller C8702. It has a built-in web server to setup and operate a frame.
This controller also provides connectivity for top level systems like SNMP managers or 3
rd
party applications.
You can get access to each frame via a web browser (IE 7 or Firefox 2.0) by simply typing its IP address into
the URL field, while the browser will add “
http:// ” automatically:
From here you can observe the module status, activate graphical meter applets, set up the parameters of
each module, store and recall presets, back up and restore the settings of individual modules or the whole
frame. It is also the tool to update the firmware of the installed modules and the firmware of the
Frame Controller itself. The firmware of the Frame Controller is called image (an image of the flash memory
of the Frame Controller). It also contains the latest module firmware that was available at the time of the
image build.
For details see the C8702 Frame Controller manual and the module manuals as well.