DynaScan Outdoor 360 Degree LED Video Display DS1713 - Manual (Page 19)

Copyright © 2007-2013 DynaScan Technology Corp. 13
Notes
. 1. For your reference, the airflow rate of a 120mm (L) x 120 (W) mm x 38mm
(H) 2900-rpm fan is about 70 CFM. For this model, to achieve the best
dissipation effect, at least eleven fans of this kind need installing on it.
2. A maintenance opening about 200mm (L) x 170mm (W) must be kept on
the top for possible maintenance or repair work.
3. A vent filter as the one attached to the base needs installing to each vent
4. The decoration in the control box side must be detachable.
5. The top covers cannot be removed for decorating the DS1713.
6. The decoration of the upper or the lower part of the display must be
detachable or take possible LED module replacement and regular system
maintenance and damage to the display into account when laying out a
desired decoration. The limitations we advise above only focus on heat
dissipation.
7. The top (without the plastic covers) of the display can support the weight
less than 100Kg, which must be allocated in average.
The position of
the 5mm gap
between the
lower decoration
and the bottom
of the display
stated in Notices
below.
The base of the
display
The position of
lower
decoration
The position
of upper
decoration