2 sd memory card update – Doremi GENeration3D User Manual

Page 37

7.2 SD Memory Card Update

Note: The SD memory card must be formatted to FAT or FAT32.

•

To perform an update with an SD memory card, do the following:

•

Copy the firmware file (e.g., “dd_g3D_1.2.0.bin”) on the SD Memory Card.

•

Plug the SD Memory card into the SD port of the Generation 3D (Figure 2).

•

Power on the Generation 3D and go to the “System” menu (Section 3.7).

•

Select the “SD Memory update” sub-menu.

•

Select the file to use for the update using the menu scroll wheel (Figure 1).

•

Confirm the update.

•

Once the update is complete, turn off the unit and then power it back on.

G3D.OM.002067.DRM

Page 37

Version 1.3

Doremi Labs