Doremi GENeration3D - Manual (Page 21)

5.2 Remote Controller Functions
Remote Control Function
Input format selection Not used
“IR Lock” button Not used
“RESET” button Reset the Generation 3D to the factory settings
“Menu” button Invoke the Menu System. Pressing this button on
the IR is similar to turning the Menu Wheel on the
Generation 3D front panel
“Exit” button Go back one menu level. Similar to front panel
"ESC" button
Output format area Select the output interface and resolution
“OUT-HDM” button Select HDMI as the output interface
“OUT-SDI” button Select SDI as the output interface
“Up Arrow” button Not used
“Down Arrow” button Not used
“Left Arrow” button Navigate left. Similar to Wheel counter clockwise
“Right Arrow” button Navigate right. Similar to Wheel clockwise
“Select” button "Ok/Select" is similar to "Select" on front panel
“InRes” buttons Not used
“InFPS” buttons Not used
“Scaling” button Not used
“De-Int Filter” button Not used
“Status OSD” button Not used
“Save” button Save settings
G3D.OM.002067.DRM Page 21 Version 1.3
Doremi Labs