Doremi GENeration3D - Manual (Page 23)

6 Doremi Universal Interface Software (DUIs)
6.1 Doremi Universal Interface Installation
• To install the Doremi Universal Interface software follow the steps below:
• Plug the provided USB cable between the Generation 3D and an available USB port on the
PC. See Figure 2 for the USB connector location.
• Power on the Generation 3D.
• If the "Found New Hardware Wizard" window appears, at this stage, click “Cancel”.
• Run the installation package by double-clicking on a file
“Doremi_Universal_Interface_Software-4.6.0.exe”, which can be downloaded from
http://www.doremilabs.com/
• After the installation is over, the "Found New Hardware Wizard" window will appear.
Note: For Windows 7 users, the “Found New Hardware Wizard” will not appear.
• Follow the steps as written below:
• Select the “No, not this time” option and click on “Next >” (Figure 7).
Figure 7: "Found New Hardware Wizard” Window – Step 1
• When asked for the type of software installation, choose the option “Install the software
automatically (Recommended)” (see Figure 8).
G3D.OM.002067.DRM Page 23 Version 1.3
Doremi Labs
Click The "No, not
this time" Option