Doremi GENeration3D - Manual (Page 14)

3.3 Pattern Menu
• The following menu can be used to set up the Pattern parameters.
Sub-Menu Value Description
2D Default This menu shows the available
2D patterns on the SD card.
If there is no SD card present,
only the Default pattern will be
shown.
3D Default This menu shows the available
3D patterns on the SD card.
If there is no SD card present,
only the Default pattern will be
shown.
3.4 Output Menu
• The following menu can be used to set up the output parameters:
G3D.OM.002067.DRM Page 14 Version 1.3
Doremi Labs