d&b Vi - Manual (Page 26)

1. Prepare the flying frame
For a mixed type of setup, the Splay link of the V Flying frame must
be attached to «POSITION V-SUB». Check the position and alter it
if necessary. Proceed as follows:
Changing the Splay link position
WARNING!
Potential risk of personal injury and/or
damage to material!
The fixing bolt [B] of the frame's Splay link bears the full load of
the array.
It is essential that the bolt is fitted correctly and secured by a
locked ring cotter [C].
To change the Splay link position, proceed as follows:
1. Release and remove the Locking pin of the Splay link at park
position and fold out the Splay link.
2. Unlock and remove the ring cotter of the fixing bolt.
3. Pull out the fixing bolt and remove the Splay link.
d&b Vi Rigging manual (1.2 EN) 26