d&b Vi User Manual
Page 10

Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
The Z5387.001 Vi Mounting frame bottom is equipped and
supplied with the following rigging components.
Note: In delivered condition, the Rear link [3] and the O-ring
[4] are not attached to the frame. For assembly instructions
please refer to Þ Chapter 2.4. "Rear/Splay links of the
frames" Þ Attaching the Splay/Rear links and the O-ring on
Pos.
Component
Description
[1]
Z5387.001
Vi Mounting frame bottom
Weight (including all rigging components): 9.5 kg (21 lb).
[2]
Front links
The Mounting frame is equipped with two Front links including the corresponding Locking pins.
[3A]
Rear link
In connection with the Front links, this rear link is used to attach the frame underneath the last
cabinet of an array.
[3B]
Splay link (0°)
In connection with the Front links, this additional splay link is used to attach the first TOP
cabinet at 0° underneath SUB cabinets in a mixed array configuration with SUB cabinets at
the top of the array.
[3c/d]
Fixing bolt
[3c] and Ring cotter [3d].
[4]
O-ring
Including Fixing bolt
[4a] and Ring cotter [4b].
[5]
2t Shackle
Additional 2t shackle.
d&b Vi Rigging manual (1.2 EN)
10