CRU Forensic RTX - Manual

A Brand of CRU-DataPort A Brand of CRU-DataPort
Forensic RTX-3QJ Quick Start Guide
Forensic Device User Advisory
Before using this tool for accessing sensitive data, it’s a good idea to verify the write-blocking
function of the product. This is easily done: attach a known good formatted drive, and verify that
the drive mounts properly on your computer. Copy files to the drive. Due to the “spoof writing”
style of write-blocking employed by this product, the files will appear to copy successfully. Next,
unmount and remount the drive. The files that you copied should not appear after the drive is
remounted. If they do appear, there is a problem with your forensic device, and you should contact
our support department for further instructions.
WiebeTech support may be reached at 866-744-8722 (toll free) or
[email protected] (email).
RTX, TrayFree, and WiebeTech are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners.
© 2008, 2012 CRU Acquisitions Group, LLC. All rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of two years from the original date of purchase.
CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability: The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation and
hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CRU or its suppliers be
liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect,
consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of the
possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves the right to make modifications and
additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is operated in a home or commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
A9-410-0004-1 Rev. 1
Product Name Forensic RTX410-3QJ SATA
Forensic RTX410-3QJ IDE + SATA
Drive Compatibility • 2.5-inch & 3.5-inch SATA drives
• 3.5-inch IDE/PATA drives (IDE + SATA model only)
• 2.5-inch SATA using included converter
Host Interfaces • eSATA
• FireWire 800 (two ports per bay, daisy-chainable)
• USB 3.0 (compatible with USB 2.0 using USB 2.0 cable)
Power Adapter Input: 100-240VAC; Output: +12V / +5V
Operating System
Requirements
• Windows XP, Vista, Windows 7
• Mac OS X
• Linux distributions supporting the desired connection type
Shipping Weight 25 pounds
Dimensions 270mm x 177mm x 231mm
Compliance CE, FCC, RoHS,
Support Tech support is standing by and ready to help! Contact us though wiebetech.com/
techsupport, or call (866) 744-8722.WiebeTech is a brand of CRU
For more information and the full user manual for this product, please visit
www.wiebetech.com/techsupport.php .