CRU RTX111-3Q - Manual (Page 3)

CRU
R T X 1 - B a y - 3 Q U s e r M a n u a l A 9 - 1 1 0 - 0 0 0 1 R E V 2 . 0 - 3 -
1.2 Identifying Parts
Take a moment to familiarize yourself with the parts of RTX1-Bay-3Q. This will help you to better
understand the remaining instructions.
2. Installation Steps
2.1 Installing a Hard Drive
2.1.1 RTX100-3Q and RTX Secure 110-3Q
a) Pull the ejection handle, open the door.
b) Slide in your SATA hard drive, connector-end first.
c) Shut the door until you hear it click.
2.1.2 RTX111-3Q, RTX Secure 111-3Q, and RTX112-3Q
a) Slide the drive carrier out of the RTX.
b) The carrier’s cover is held in place by a screw on the rear of the carrier. Remove the screw, then
remove the cover.
c) Slide the drive in from the front of the carrier.
d) Mate the connection on the drive with the connection on the drive carrier circuit board.
e) Flip the drive/carrier assembly over, while holding the HDD in place. Secure the drive in place with
the provided screws
RTX110-3Q and
RTX Secure 110-3Q
RTX111-3Q,
RTX Secure 111-3Q
and 112-3Q
RTX115-3Q and
RTX115DC-3Q
Rear of all Units
Key Lock
Power and Access LEDs
Ejection Handle
Key Lock
Power and Access LEDs
Encryption Key Slot
(RTX112-3Q only)
Carrier Handle
Key Lock Carrier Handle
Drive Ready/Error LED
Drive Activity
Fan Error LED
Disable Switch
Power button
Encryption Key Slot
(RTX Secure 110 and
RTX Secure 111-3Q only)
Power switch
Cooling Fan
FireWire ports
USB 3.0 Port
eSATA Port
Power Connection
Port