CRU RTX100-3Q - Manual (Page 9)

CRU
R T X 1 0 0 - 3 Q U s e r M a n u a l A 9 - 1 0 0 - 0 0 0 6 R E V 1 . 0 - 9 -
Tested to comply
with FCC standards
FOR OFFICE OR COMMERCIAL USE
6. Technical Specifications
Product name RTX100-3Q
Interface Types &
Speeds*
USB 3.0: up to 5.0 Gbps
eSATA 3G: up to 3.0 Gbps
FireWire 800: up to 800 Mbps
*Actual throughput is drive dependant.
Drive Types Supported 3.5” SATA hard drives
Support for Drives over
2 Terabytes
Yes
LED Power/HDD Activity
Operating System
Requirements
Windows 7, Vista, XP
Mac OS X
Linux distributions that support the desired connection type
Power Switch 2 position: On / Off
Power Supply
Input: 100-240VAC
Output: +12/+5 V, +2/+2 A
Compliance CE/FCC, ROHS
External Material Aluminum alloy case
Product Weight 4 pounds empty, 6 pounds with drive
Dimensions 228mm x 133mm x 37mm
Support
We don’t expect anything to go wrong with your CRU product. But if it does, Tech Support is
standing by and ready to help. Contact us through www.cru-dataport.com/support
or wiebetech.com/techsupport. WiebeTech is a brand of CRU.
We also offer phone support at (800) 260-9800 and (866) 744-8722.
© 2011 CRU Acquisitions Group, LLC. All rights reserved. RTX and TrayFree are trademarks of CRU Acquisitions Group, LLC.
Other marks are the property of their respective owners.
Limited Product Warranty
CRU-DataPort (CRU) warrants RTX to be free of significant defects in material and workmanship for a period of one year from the
original date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights
with respect to the documentation and hardware. No CRU dealer, agent or employee is authorized to make any modification,
extension, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute
products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or
incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has
been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at
issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own
expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches
from the DC plug.
4) Reorient or relocate the receiving antenna