CRU DE200 SCSI - Manual (Page 2)

Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800 www.CRU-DataPort.com
For more information, please Contact your CRU representative for
further details and ordering information at:
Technical Support (800) 260-9800 x1772
Sales (800) 260-9800 x1761
Limited Product Warranty
CRU-DataPort (CRU) warrants the Data Express DE200 to be free
of significant defects in material and workmanship for a period of
five years from the original date of purchase. CRU’s warranty is
nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warran-
ties. CRU expressly disclaims all other warranties, including but not
limited to, the implied warranties of merchantability and fitness for a
particular purpose and non-infringement of third-party rights with re-
spect to the documentation and hardware. No CRU dealer, agent or
employee is authorized to make any modification, extension, or ad-
dition to this warranty. In no event will CRU or its suppliers be liable
for any costs of procurement of substitute products or services, lost
profits, loss of information or data, computer malfunction, or any other
special, indirect, consequential, or incidental damages arising in any
way out of the sale of, use of, or inability to use any CRU product or
service, even if CRU has been advised of the possibility of such dam-
ages. In no case shall CRU’s liability exceed the actual money paid for
the products at issue. CRU reserves the right to make modifications and
additions to this product without notice or taking on additional liability.
Certification
EMI Standard: FCC Part 15 Class B, CE
EMC Standard: EN55022, EN55024
FCC Certification
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received; includ-
ing interference that may cause undesired operation.
Register your product at www.CRU-DataPort.com
A7-200-0001 Rev. 1
Selecting the Unit ID Number
Use the alignment tool (provided) to select the ID number of the disk drive.
NOTE: The lock on the Data Express receiving frame functions as a
lock and a DC power switch for the carrier unit. The lock MUST be
engaged (turned counterclockwise) in order to supply power to the
carrier and installed drive unit.
IMPORTANT NOTICE - PLEASE READ!
If you plan to use this product in a system with earlier-technology SCSI
(single-ended or Ultra2 LVD) devices and/or cables, CRU strongly recom-
mends that the Data Express SCSI Ultra160 Repeater/Isolator Board be
installed on the product’s receiving frame.
All CRU SCSI removable enclosures are completely downward compat-
ible and adhere strictly to SCSI specifications. However, the way LVD
downward-compatibility works, if any one of the devices on the SCSI bus
is only capable of single-ended operation, the entire bus will switch to
single-ended mode
AND all of the earlier-technology SCSI specifications (cable lengths,
termination types, device spacing, etc) must again apply for the system
to function properly. Since exact SCSI specification tolerances may vary
between manufacturers, system incompatibilities can occur. The CRU
Data Express Repeater Board has been shown to minimize the effects of
combining system components specified for different SCSI technologies
and/or designed by different manufacturers.