CRU DE110 IDE - Manual (Page 2)

Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800 www.CRU-DataPort.com
Figure 3: Unit ID Select Switch Settings
NOTE: The unit ID number display is for ID display purposes
only (when using the “Drive Select Method”). The Master/Slave
setting must still be set on the drive itself (refer to section
“Master/Slave Drive Section” for further information).
Selecting the Unit ID Number: Use the alignment tool (provided)
to select the ID number of the disk drive.
NOTE: The lock on the Data Express receiving frame functions
as a lock and a DC power switch for the carrier unit. The lock
MUST be engaged (turned counterclockwise) in order to supply
power to the carrier and installed drive unit.
Limited Product Warranty
CRU-DataPort (CRU) warrants the Data Express DE110 to be free of significant defects in
material and workmanship for a period of five years from the original date of purchase. CRU’s
warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims
all other warranties, including but not limited to, the implied warranties of merchantability and
fitness for a particular purpose and non-infringement of third-party rights with respect to the
documentation and hardware. No CRU dealer, agent or employee is authorized to make any
modification, extension, or addition to this warranty. In no event will CRU or its suppliers be
liable for any costs of procurement of substitute products or services, lost profits, loss of infor-
mation or data, computer malfunction, or any other special, indirect, consequential, or inciden-
tal damages arising in any way out of the sale of, use of, or inability to use any CRU product or
service, even if CRU has been advised of the possibility of such damages. In no case shall CRU’s
liability exceed the actual money paid for the products at issue. CRU reserves the right to make
modifications and additions to this product without notice or taking on additional liability.
Certification
EMI Standard: FCC Part 15 Class B, CE
EMC Standard: EN55022, EN55024
FCC Certification
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received; including interference that
may cause undesired operation.
Register your product at www.CRU-DataPort.com
A7-110-0002 Rev. 1.2
Spacer Plates (Optional)
The DE110 is designed to fit most computer systems with standard
5.25” peripheral slots. The installation of the spacer plates (provided)
may or may not be necessary.
NOTE: Depending on the computer system, spacer plates may
be positioned on the receiving frame to utilize either top or bot-
tom row of side-mounting holes.
Unit ID Select Switch Settings
The following table lists the unit ID select switch settings and the
valid AT/IDE unit numbers. Please note that all invalid switch settings
have X’s and result in a blank display in the receiving frame window.
Figure 2: Drive Installation Assembly
Drive Cover
(provided)
Drive
(not included)
Drive Carrier
Board
Spacer Plate*
(2 total)
*Note: Installation of Space
Plates is optional
#6-32 Phillips F. H.
Screw (6 total)
Drive
Carrier
Figure 4: Unit ID Select
Switch Location
Drive Carrier
Guide
Typical Data Express
Receiving Frame
Unit ID Select
Rotating Switch