CIRCUTOR ReadWatt Series - Manual (Page 6)

1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the unit:
a) The unit meets the specifications described in your order.
b) The unit has not suffered any damage during transport.
c) Perform an external visual inspection of the unit prior to switching it on.
d) Check that it has been delivered with the following:
- A Velcro strap to attach the unit to the energy meter with impulse emitter,
- A connection cable,
- A CD.
If any problem is noticed upon reception, immediately contact the transport
company and/or CIRCUTOR's after-sales service.
2�- PRODUCT DESCRIPTION
ReadWatt is an impulse sensor that can be attached to an energy meter verification impulse
emitter so that, through a MODBUS RTU protocol, there is an energy totaliser with the same
accuracy as the meter itself, but without physical access being necessary.
The unit features:
- 1 impulse indicator LED.
- 1 impulse output.
- RS-232 communications with MODBUS RTU protocol.
- RS-485 communications with MODBUS RTU protocol.
6
ReadWatt
Instruction Manual