Casella CEL Indoor air quality monitor - Manual (Page 28)

3. So to copy data from a 256 Kbyte card into the file Test.img and then
clear the card, type Decopy test.img /256 /cdata
↵
Having copied the card, you must now convert the Image file using
DeImage .
11.2.2 DeImage
This program converts data stored in an Image file into a format suitable for
use by the WinIaq application
.
1. Install the DeImage software on your computer following the
instructions supplied with it.
2. To run the DeImage program and convert an Image file, type
deimage u /i=filename1 /o=filename2 ov
↵, where:
filename1 The MS-DOS name of the existing Image file
created by DeCopy. This must include the
.img file extension.
filename2 The MS-DOS name of the new data file into
which the converted data will be saved. This
must include the .dat file extension.
ov Overwrite any existing data file with the same
name. If this option is not included, the
process will abort if an existing file is
detected.
3. So to convert data from the file Test.img to the file Test.dat, type
Deimage u /i=test.img1 /o=test.dat ov
↵
The resulting data file will be accessed directly using the WinIaq
appli
cation.
PCMCIA Cards
Page 28 of 42
MICROTHERM indoor air quality &
WinIaq Application Software - User Manual