Casella CEL Indoor air quality monitor - Manual (Page 10)

4. WinIaq
WinIaq is a Windows application specifically written by CASELLA CEL to simplify
the process of programming the MICROTHERM and presenting data collected
with the unit. The current application was designed to operate under Windows
3.1 but will also run under Windows 95.
4.1 Installation on Windows 3.1
®
1. Insert the WinIaq disk in y our floppy disk drive, and close the drive door.
2. From the Program Manager, select File / Run…
3. Type a:\setup, where “a” is the identity of the floppy disk drive.
4. Press Enter.
5. Follow the instructions on the screen.
4.2 Installation on Windows 95
®
1. Insert the Win I aq disk in your floppy disk drive, and close the drive door.
2. From the Task Bar, select Start / Run…
3. Type a:\setup, where “a” is the identity of the floppy disk drive.
4. Press Enter.
5 Follow the instructions on the screen.
4.3 Starting WinIaq
Start the WinIaq application by double clicking on the icon (Windows 3.1) or
selecting it from the Start Menu (Windows 95).
Once the application has been loaded you are ready to create your first
MICROTHERM profile.
WinIaq Software
WinIaq
Page 10 of 42
MICROTHERM indoor air quality &
WinIaq Application Software - User Manual