Casella CEL CEL-296 - Manual (Page 6)

type are generated by the autoscan routine, and one of each type is
produced by a manual analysis.
The CEL low power serial interface also allows connection to the
CEL-438 Noise Level Analyzer, CEL-338 Graphics Printer and
Logger, and 238A Secondary Processor, or to some other digital
device for data logging or processing, and for control purposes.
The CEL-296/3 may also be used with other current types of CEL
instrumentation that has not got the interface, including the
following.
CEL-275/2A, /2C, /3A, /3C Precision Integrating Impulse
Sound Level Meter (Type 1I),
CEL-383/2A, /2C, /3A, /3C Integrating Impulse Sound Level
Meter (Type 2I),
CEL-262 Environmental Noise Analyzer (Type 1),
CEL-160
Graphic Level Recorder.
A factory conversion is available to adapt the following older
versions of these sound level meters so that they can be close
coupled to the CEL-296/3.
CEL-493/2* Precision Integrating Impulse Sound Level
Meter (Type 1I),
CEL-275A, & B Precision Integrating Impulse Sound Level
Meter (Type 1I),
CEL-383A, & B Integrating Impulse Sound Level Meter
(Type 2I),
Note*:Some early models of the CEL-493 cannot fully utilize the
autoscan facilities. however ALL 493/2s are fully operable.
Please consult CEL quoting the relevant serial number.
Page 6 CEL-296/3 Operator Handbook CEL Instruments Ltd