BIXOLON SRP-350plusIII - Manual (Page 9)

Rev. 1.03 - 9 -
SRP-350/352plusIII
1-2 Interface
Connect the printer to the host computer using the right interface cable that complies with
the specifications of the interface. The drawer to be used with the printer should meet the
specifications of the printer.
※ CAUTIONS
Before connecting any cables, make sure that both the printer and the host are
turned off.
1-2-1 USB Interface
No. Signal Name Designation (Color) Function
Shell Shield Drain Cable Frame Ground
1 VBUS RED Host Power
2 D- WHITE Data Line (D-)
3 D+ GREEN Data Line (D+)
4 GND BLACK Signal Ground
1-2-2 Ethernet Interface
Pint No.
Signal
Name
Color Function
1 TD+ WHITE ORANGE Transmit +
2 TD- ORANGE Transmit -
3 TCT WHITE GREEN Receive +
4 NC BLUE
5 NC WHITE BLUE
6 RCT GREEN Receive -
7 RD+ WHITE BROWN
8 RD- BROWN
* IP and MAC information can be obtained from the self-
test. Refer to the Ethernet User’s
Manual that is available from the BIXOLON website for more detailed information.
* For using this interface in the Bluetooth or WLAN applied product, Printer wiring requires
to use double shielded (Cat 7) Ethernet cable.
USB Connector
Power Connector
Ethernet Connector