BIXOLON SRP-350plusIII - Manual (Page 26)

Rev. 1.03 - 26 -
SRP-350/352plusIII
5. Appendix
5-1 Cleaning Printer
Paper dust inside the printer may lower the print quality. In this case clean the printer as
follows:
5-1-1 Open the printer cover and remove any paper.
5-1-2 Clean the print head with a cotton swab moistened with alcohol solvent.
5-1-3 Clean the paper sensor and paper roller with a cotton swab and a dry cloth.
5-1-4 Insert a paper roll and close the printer cover.
The remaining amount of paper detected by paper near-end sensor varies with the
diameter of the paper core. To set the paper near-end sensor, contact your dealer.